Concrete prep / Flake coatings / Maple Crossing

A better floor.
From the
ground up.

A typical two-car garage

$3,200–$4,000

For 400–500 sq ft of sound, bare concrete. Prep, a full flake finish and a clear topcoat.

Compare garage sizes
An open garage with a floor half prepared concrete and half blue flake coating, with a roller at the dividing edge.
Preparation comes first. The finish is only the final layer.

What the work includes

The prep is
the point.

We look at the slab before choosing the schedule. A clean-looking floor can still have moisture, old sealer or moving cracks to work through.

  1. Read the concrete.

    Measure, check moisture and inspect old coatings, edges and cracks.

  2. Make a sound surface.

    Mechanically grind, collect dust and repair agreed stationary cracks before coating.

  3. Build the finish.

    Apply the base coat, broadcast color flakes, remove loose flakes and seal with a clear topcoat.

Plan where to park.

Allow at least 72 hours after the final coat before parking in suitable conditions. Cold weather can extend that to 5–7 days. We give you a written return time.

See the workday and cure plan

Start with the slab you have.

Tell us the approximate size, the current surface and when you can clear the garage.

Request a quote